横向和纵向加热涂钨平台石墨炉原子吸收光谱法测定镓的比较

分别优化了横向加热和纵向加热涂钨平台石墨炉原子吸收光谱法测定镓的条件。结果显示,纵向加热方式的原子化温度比横向加热低,在灰化温度、进样量、酸介质的影响和化学改进剂等方面,两者没有显著差别。纵向加热的灵敏度高于横向加热,线性范围也比横向加热宽;但是采用横向加热方式能获得更低的检出限和更强的抗干扰能力。     

An alternative alpha finite element method with discrete shear gap technique for analysis of laminated composite plates

This paper presents an alternative alpha finite element method using triangular meshes (AαFEM) for static, free vibration and buckling analyses of laminated composite plates. In the AαFEM, an assumed strain field is carefully constructed by combining compatible strains and additional strains with an adjustable parameter α which can produce an effectively softer stiffness formulation compared to the linear triangular element. The stiffness matrices are obtained based on the strain smoothing technique over the smoothing domains and the constant strains on triangular sub-domains associated with the nodes of the elements. The discrete shear gap (DSG) method is incorporated into the AαFEM to eliminate transverse shear locking and an improved triangular element termed as AαDSG3 is proposed. Several numerical examples are then given to demonstrate the effectiveness of the AαDSG3.     

Numerical simulation of viscous oscillatory flow past four cylinders in square arrangement

The results of a numerical study of the viscous oscillating flow past four circular cylinders, for a constant frequency parameter equal to 50 and KC ranging between 0.2 and 10, are presented. The cylinders were placed on the vertices of a square, two sides of which were perpendicular and two parallel to the oncoming flow, for pitch ratios, P/D, ranging between 2 and 5. The finite-element method was employed for the solution of the Navier-Stokes equations, in the formulation where the stream function and the vorticity are the field variables, whereas the pressure distribution throughout the computational domain was obtained from the solution of Poisson’s equation. When the Keulegan-Carpenter number is lower than 4, the flow remains symmetrical with respect to the horizontal axis of symmetry of the solution domain and periodic at consecutive cycles. As KC increases to 4, the flow becomes aperiodic in different cycles, although symmetry with respect to the horizontal central line of the domain is preserved. For KC equal to 5, asymmetries appear intermittently in the flow, which are eventually amplified as KC increases still further. These asymmetries, in association with the aperiodicity of flow in different cycles, lead to an almost chaotic configuration as KC grows larger. For characteristic cases the flow pattern and the time histories of the in-line and transverse forces exerted on the cylinders are presented. The mean transverse forces acting on the cylinders, the r.m.s. values of the in-line and transverse forces, together with the drag and inertia coefficients of the in-line force, were evaluated for each pitch ratio in the range of Keulegan-Carpenter numbers examined and are presented in diagrams.     

Evaluation of the piezoelectric behaviour produced by a thick-film transducer using digital speckle pattern interferometry

This paper presents an interferometric measurement of the out-of-plane deflections produced by a piezoelectric transducer, manufactured by thick-film deposition of a ceramic paste over an alumina substrate, when is subjected to a DC electric voltage. It is shown that a digital speckle pattern interferometer with an incorporated phase-shifting facility allows the measurement of nanometer displacements generated by the piezoelectric device. These measurements are used to evaluate the effective piezoelectric charge constant along the polarization direction (d₃₃)_eff that characterizes the thick-film transducer.     

Optimization of energy extraction in transverse galloping

A numerical method to analyse the stability of transverse galloping based on experimental measurements, as an alternative method to polynomial fitting of the transverse force coefficient C_z, is proposed in this paper. The Glauert–Den Hartog criterion is used to determine the region of angles of attack (pitch angles) prone to present galloping. An analytic solution (based on a polynomial curve of C_z) is used to validate the method and to evaluate the discretization errors. Several bodies (of biconvex, D-shape and rhomboidal cross sections) have been tested in a wind tunnel and the stability of the galloping region has been analysed with the new method. An algorithm to determine the pitch angle of the body that allows the maximum value of the kinetic energy of the flow to be extracted is presented.     

A new method for resolving combinatorial ambiguities at hadron colliders

We present a new method for resolving combinatorial ambiguities that arise in multi-particle decay chains at hadron colliders where the assignment of visible particles to the different decay chains has ambiguities. Our method, based on selection cuts favoring high transverse momentum and low invariant mass pairings, is shown to be significantly superior to the more traditional hemisphere method for a large class of decay chains, producing an increase in signal retention of up to a factor of 2. This new method can thus greatly reduce the combinatorial ambiguities of decay chain assignments.     

Theoretical model for the transverse interference pattern of GRIN optical fiber using a laser sheet of light

A new technique (El-Ghandoor et al., Opt. Laser Technol. 31(7) (1999) 481–488) has been applied to study the shape of transverse interference fringes, instead of multiple beam Fizeau fringes (Marhic, Stein, Appl. Phys. Lett. 35 (1975) 1678–1682), from a GRIN optical fiber. In this technique, a laser light sheet is used to illuminate and pass directly through the optical fiber. Theoretical expressions are derived for the optical path differences of three groups of interference beams. The first one passes through the cladding, the core, and then the cladding once again; the second passes through the cladding only, and the third passes through the surrounding air. Theoretical expressions for the shape of transverse interference fringes formed across isotropic non-absorbing optical fibers are also calculated.     

Detonation in gases

We review recent progress in gaseous detonation experiment, modeling, and simulation. We focus on the propagating detonation wave as a fundamental combustion process. The picture that is emerging is that although all propagating detonations are unstable, there is a wide range of behavior with one extreme being nearly laminar but unsteady periodic flow and the other chaotic instability with highly turbulent flow. We discuss the implications of this for detonation propagation and dynamic behavior such as diffraction, initiation, and quenching or failure.     

A refined integro-surface energy-based model for vibration of magnetically actuated double-nanowire-systems carrying electric current

A novel surface energy-based model is developed to examine more precisely vibrations of current-carrying double-nanowire-systems immersed in a longitudinal magnetic field. Using Biot-Savart and Lorentz laws, a more refined version of interwire interactional magnetic forces is presented. By employing Rayleigh beam theory, the equations of motion are derived. In fact, these are coupled integro-differential equations which are more accurate with respect to those of the previously developed models. For simply supported and clamped nanosystems, governing equations are analyzed via assumed mode method. The effects of interwire distance, slenderness ratio, electric current, magnetic field strength, and surface effect on the fundamental frequency are addressed carefully. The obtained results display the importance of exploiting the refined model for vibration analysis of nanosystems with low interwire distance, high electric current, and high magnetic field strength.     

Zn(NCN)单轴的负热膨胀性及机理研究

负热膨胀(NTE)是一种反常的物理现象, 已在合金和框架结构化合物等材料中被观察到, 但NTE材料的种类仍然有限. 本文合成了一种单轴NTE材料Zn(NCN), 该材料在c轴方向及在100~475 K下的热膨胀系数为-3.35×10^?6 K^?1, 而a轴和b轴方向则呈低热膨胀性, 体积具有低的热膨胀系数[6.13×10^?6 K^?1(100~475 K)]. 通过同步辐射X射线衍射、 扩展X射线吸收精细结构和拉曼光谱等方法, 研究了Zn(NCN)的NTE机理. 结果表明, Zn—N键具有明显的横向振动, 一些低频振动模Grüneisen参数为负值. 直接的实验证据表明, N=C=N的横向振动以及准刚性ZnN₄四面体的耦合旋转和扭摆导致了c轴方向的NTE.